Table of Contents
Advertisement
3.1 Name and Function of Each Part
Analog input connector
3. FUNCTIONS
Terminal block (AUX OUT)
Terminal block (START IN)
123
HLG HLG
ANALOG
CH selector switch
Fig. 3-1 Front View
• Analog input
connector
• Terminal blocks
(START IN)
(START OUT)
(BUSY OUT)
(AUX OUT)
• CH selector switch : Set to "1" or "2" according to which
• LED
3 - 1
Terminal block (START OUT）
Terminal block (BUSY OUT)
HLG
CH
LED
: For acquisition of analog signals from
the exterior.
: Used for input/output of contact signals
(H: high, L: low, G: ground).
: For input of start signal to e-Line from
the exterior.
: For output of e-Line start signal.
: For output of busy signal from e-Line.
: For acquisition of fraction marker signal
from L-5200 fraction collector.
channel will use AID.
: Blinks at 1-second cycles during normal
operation (or at 100-ms cycles at
occurrence of an error).
3.1
Advertisement
Table of Contents
