Configure Sdk Service; Enable Isapi; Configure Onvif - HIKVISION DS-7600NI-I2 Series User Manual

4.2.4 Configure SDK Service

SDK (Software Development Kit) service is used for third-party partners to integrate different
functions. The enhanced SDK service adopts TLS protocol over the SDK service that provides safer
data transmission.
Steps
1. Go to System → System Settings → Network → Platform Access → SDK.
2. Configure SDK and Enhanced SDK Service according to your requirement.
Note
The port for Enhanced SDK Service is 8443 by default.
3. Optional: Enable Stream Over TLS. The stream over TLS encryption technology provides more
secure stream transmission service.
4. Click Save.

4.2.5 Enable ISAPI

ISAPI (Internet Server Application Programming Interface) is an open protocol based on HTTP,
which can realize the communication between the system devices (e.g., network camera, NVR,
etc.).
Go to System → System Settings → Network → Platform Access → ISAPI to enable the function.

4.2.6 Configure ONVIF

ONVIF protocol allows the connection with third-party cameras. The added user accounts have the
permission to connect other devices via ONVIF protocol.
Steps
1. Go to System → CX → System Settings → Network → Platform Access → ONVIF .
2. Turn on Enable.
3. Select an authentication type.
4. Click Add to add a user.
5. Set the user name and password.
Caution
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product
6. Click Save.
Network Video Recorder User Manual
12