Table of Contents
Advertisement
PANEL FACILITIES
a
®
@®@
O68
@
POWER switch
Press this switch to turn the power on and off.
[ON] (depressed position) : Power is switched ON.
[STAND-BY]
(released position): Power is switched OFF.
@ PROGRAM
switches/indicator
*
Press these switches in the desired sequence from [1]
through [8] when programming the order in which the
tracks are to be played. The tracks are programmed in the
order in which the switches were pressed, and auto play
or repeat play is performed.
e
The numbers [1] through [8] indicate the order of the
tracks on the record (for instance, the [2] switch cor-
responds with the second track). During programmed
playback,
the program
indicator corresponding
to the
track presently being played will flash.
® CLEAR switch
This switch is pressed in order to clear the program.
(@) REPEAT switch/indicator
Press this switch so that the indicator lights for repeat play.
(6) LOCATE/SKIP switches (SKIP)
Use these switches
to start manuai
playback,
or during
playback
to change
the track
being
played.
When
the
switches are pressed, the tonearm will move to the right or
left.
[ <1]:
Tonearm
moves
to left.
During programmed
play,
moves to the next programmed
track. If pressed multiple
times, moves. ahead the number of tracks corresponding to
the number of times the switch is pressed.
[>]:
Tonearm moves to right. During programmed play,
moves back to the beginning of the track presently being
played. If pressed multiple times, moves back the number of
tracks corresponding to the number of times the switch is
pressed.
NOTE:
When this switch is used during programmed play, do nat allow
more than a T-second interval between presses.
©
ARM
ELEVATION
switch(UP)/
indicator
Use the switch for manual play.
Use the switch to suspend record play temporarily.
Use the switch when changing the tracks during manual
play.
{UP} indicator lights:
The tonearm rises (the stylus moves away from the record).
[UP] indicator goes out:
The tonearm
descends
(the stylus is lowered
onto
the
record).
@
START/STOP
switch
Depress this switch when starting auto play or when stop:
ping play.
SPEED switch
Set this switch in accordance with the speed of the record
which is to be played.
[AUTO]:
Automatically sets rotation speed in accordance
with the size of the record: Rotates at 33-1/3 rom
with 30 cm and 25 cm records. Rotates at 45 rprn
with 17 cm records
{33]:
Rotates at 33-1/3 rpm
{45}:
Rotates at 45 rpm
@® SENSOR switch
Depending on the type of record being played, this switch
may be used to adjust the sensitivity at the time of program-
med play
Normally the switch should be left in [NJ position.
[N}: For normal records.
{H]: For records with very narrow intervals between tracks,
{L]: For records with wide sound-groove pitch.
@) Platter
4) Rubber mat
(2 Platter shaft
13 Tonearm
44 Cartridge (PC-301)
(5) EP adapter
This is used when playing records with a ''large center hole',
46 Cabinet
(i? Dust cover
Advertisement
Table of Contents
