Table of Contents
Advertisement
2. PANEL
FACILITIES
ON
......
Press this switch and the power will come
on.
The
ARM
ELEVATION
switch
in-
dicator ( ¥) and SPEED switch indicator
(45 or 33) will both light up.
OFF ....
The power will be cut off when this switch is
released, and the indicators will go off.
NOTES:
e
The platter will not rotate when
the tonearm
is on
the arm-rest
even when
the POWER
switch is set to
ON.
e
Always set the POWER
switch to OFF when you do
not intend to use your turntable.
AUTO
SWITCH'
">
ON
......
Select this position for auto play (refer to
page 10). When this switch is pushed, the
DISC SIZE indicator (12"'30) lights up.
OFF......
When
this switch
is released,
the auto
mechanism
is disengaged, and all the oper-
ations can be performed by hand. Set the
switch
to
this position
when
playing
a
record whose size is not standardized since
the tonearm
will otherwise return to the
arm rest automatically. When this switch is
set to OFF, you will not be able to per-
form auto play and repeat play operations.
For record play, move the tonearm manu-
ally.
NOTE:
e
When
the AUTO
switch is set to OFF, the DISC SIZE
and REPEAT
switch indicators will not light up even
if the respective switches are pushed.
Press the switch that corresponds to the size of the record
you
want
to hear for auto play operations. The corre-
sponding switch indicator will then light up.
N22 307 ee a
For 30cm records
10°25 .....
For 25cm records
7°17.
.....
For 17cm records
NOTES:
e
The 12''30 switch is selected automatically when the
POWER
switch is set to ON.
©
These switches
will not work
if depressed when
the
tonearm
is moving (auto return).
Dust cover
Platter/
rubber platter mat
REPEAT SWITCH
Press this switch for repeat play. When pressed, the indica-
tor will light up, and the record will be played again (refer
to page 11 for further details on repeat play). Press this
switch again to release it. The indicator will go off and the
repeat play function will be released.
NOTES:
e
This
switch
cannot
be operated
even
if depressed
while the tonearm
is moving out of contact
with the
record.
e
There will be no repeat play when the
AUTO switch
is set to OFF.
START/STOP SWITCH
~~
Press this switch for auto play. The platter will start to
rotate, the tonearm
will automatically
move over to the
edge of the record and play will begin (auto lead-in).
If this switch
is pressed during play, the tonearm
will
automatically return to the arm rest, the platter will stop
rotating and play will be suspended (auto cut).
NOTES:
e
This
switch's
STOP
function
has
no
effect
on
tone-
arm
movement
unless the tonearm
is in contact with
the record.
e
This
switch
cannot
be
selected
when
the
AUTO
switch ts set to OFF.
Advertisement
Table of Contents
