Table of Contents
Advertisement
HOW TO REPLACE BULB:
Fig. 4
1.
To prepare for bulb replacement, unplug unit and allow it to sit for two hours to
allow the electrical charge within the unit to dissipate.
2.
Remove the tray.
3.
Remove both screws securing grate panel.
4.
Lift up grate to access bulb.
5.
Wearing gloves, gently tug on the bulb to remove.
6.
Replace bulb only with proper Black and Decker replacement bulbs type
BL, Rated 18W for model BDPC912
7.
Wearing gloves, insert replacement bulbs making sure they are properly seated into
the sockets that they were removed from.
8.
Gently apply pressure on bulbs until they snap into socket securely.
9.
Place grate plate back into position so that grate tab is aligned above screw hole in
main unit indicated with arrow. (see Fig. 7)
Page 6
Fig. 5
(As indicated on Pg. 5)
(see Fig. 5)
.
(see Fig. 4)
(see Fig. 6)
Fig. 7
GRATE TAB
Fig. 6
BDPCA 18W
Advertisement
Table of Contents
