Hitachi HF-W6500 60 Manual page 156

● Drive status
<A/S Model>
No. Current status
1 Healthy
2 SMART Detected Healthy, SMART Detected,
3 Overrun
4 Not Connected
（*1）The equipment will not start without a drive in drive bay 1, and
consequently, "Not connected" is not displayed for drive bay 1 on the
popup menu.
（*2）Transition from "SMART Detected" or "Overrun" to "Healthy"
means that the target drive was replaced and that the new drive is connected.
（*3）It is assumed that transition from "Not Connected" means a new drive is
connected. Consequently, transition to "SMART Detected" or
"Overrun" is not allowed.
<B/T Model>
The following table shows the list of items on the menu when you right-click Drive bay
1 or Drive bay 2.
The menu displayed when you right-click Drive bay 3 is the same as for the <A/S
Model>.
No. Current status
1 Healthy
2 SMART Detected SMART Detected, Not Connected,
3 Overrun
4 Not Connected
5 Offline
6 Rebuild
If the RAID status is "Degrade", "Offline" and "Not Connected" are not
(*1)
displayed.
If the RAID status is "Degrade", "None" is the only item on the menu
(*2)
and is grayed out.
Transition of the status from "Rebuild" to "Healthy" means the rebuild
(*3)
processing is complete.
We suppose transition from "Rebuild" means a new drive is connected.
(*4)
Consequently, transition to "SMART Detected" or "Overrun" is not
allowed.
Statuses in the popup menu
Healthy, SMART Detected,
Overrun, Not Connected
Not Connected
Healthy, Overrun, Not Connected
Healthy, Not Connected
Statuses in the popup menu
Healthy, SMART Detected,
Overrun, Not Connected, Offline
Offline
Overrun, Not Connected, Offline
Not Connected, Rebuild
Not Connected, Offline, Rebuild
Healthy, Not Connected, Offline,
Rebuild
8-13
8. SIMULATING THE HARDWARE STATUS
Note
(*1)
(*1) (*2)
(*1) (*2)
(*1) (*3)
Note
(*1)
(*2)
(*2)
(*3) (*4)