Selecting An Aspect Ratio; Adjusting The Zoom And Focus - Hitachi CP-X440J User Manual

Operating
Searching an input signal
1.
Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to
fi nd any input signals.
Then when an input is found, the projector will stop
searching and display the image. If no signal is found,
the projector will return to the state selected before the
operation.
RGB IN 1  RGB IN 2  COMPONENT VIDEO  S-VIDEO  VIDEO

Selecting an aspect ratio

1.
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
 For an RGB signal
NORMAL  4:3  16:9
 For a video signal/no signal
4:3  16:9  SMALL
● The NORMAL mode keeps the original aspect ratio of the signal.
● For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT
VIDEO input, only 16:9 mode can be selected.
● Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

1.
Use the zoom knob to adjust the screen size.
2.
Use the focus ring to focus the picture.
18
VIDEO
ASPECT T
MAGNIFY
ON
OFF
FREEZE
POSITION
ESC
VIDEO
ASPECT
MAGNIF MAGNIFY
ON
OFF
FREEZE
POSITION
ESC
Focus ring
SEARCH
RGB
BLANK
A AUTO
VOLUME
MUTE
KEYSTONE
MENU
ENTER
RESET
SEARCH
RGB
AUTO BLANK
VOLUME
MUTE
KEYSTONE
MENU
ENTER
RESET
Zoom knob