Table of Contents
Advertisement
Connecting Other Equipment
After making these connections, you will be able to do the following:
¢ View the playback of videotapes
*RecordTVprograms
Record one TV program while viewing another program
Connecting a VCR, video disc player or Camcorder equipped with an S video output jack
to S video input
YC-15V/30V
(not supplied)
<f [im
Preparing for use
1 Turn on the TV.
2 Set S-VIDEO to 'ON' (p. 48).
3 Press TV/VIDEO on the TV or on the Remote
Commander so that "VIDEO 1," "VIDEO 2" or "VIDEO 3"
appears on the screen.
VIDEO 1: for equipment connected to VIDEO 1 IN
VIDEO 2: for equipment connected to VIDEO 2 IN
VIDEO 3: for equipment connected to VIDEO 3 IN
To return to TV mode
Press TV/VIDEO or CHANNEL +/- on the TV, or press TV/
VIDEO, CH +/- or 0 - 9 and ENTER on the Remote
Commander so that a channel number appears on the
screen.
Note
You can watch both a TV and a VCR image at once, using Picture-
in-Picture (pp. 39 ~ 43).
to VHF/UHF
qewdjnby
sag
Buyseunog
igs
Suojoauue)
euuawy
Guyey
to
VHF/UHF output
Operating the equipment
To operate the video equipment, refer to the instruction
manual that comes with the equipment.
You can operate a Sony VCR or video disc player, or
anon-Sony VCR with the supplied Remote Commander.
For details, see "Using the Programmable Remote
Commander" (pp. 68 — 75).
About S video input
Video input and output signals can be separated into Y
|
(luminance or brightness) and C (chroma or color) signals.
Usually these two signals are combined in a VCR and sent
as one signal to a TV. Separation of the Y and C signals
prevents them from interfering with one another, thereby
improving picture (especially color) quality.
This TV is equipped with S video input jacks through which
these separated signals can be input directly.
Chapter 1: Setting Up
1 5
Advertisement
Table of Contents
