Auto Power Off - Vivitar Vivicam 3655 User Manual

Formatting a Compact Flash Memory Card will cause all images currently stored on that card to be erased.
This camera is equipped with an automatic power off function to help conserve battery power. If no operations are performed
for a period of 1, 2 or 3 minutes, the camera will automatically power off. The camera lens will be retracted and covered. After
the lens has retracted, the power switch must be used to power the camera back on.
1.Pushing the Zoom Control to increase or decrease the delay from 1 to 3 minutes.
2.Pressing OK saves the new settings, and returns to the SETUP menu.
In ERASE mode, the user can view previously captured images either on the Display LCD, or a TV. When an image is
displayed in ERASE Mode, the Zoom Control can be used to scroll backwards or forwards through stored images. Pressing
the Menu button in ERASE Mode entering the ERASE Menu.
1.Set the camera to Erase mode.
2.Use the zoom control to scroll through the images.
3.Press menu button to enter Erase menu.
1. Set the camera to
2. Use the zoom control to select the image to be erased
3. Press button to enter Erase Menu
4. Use the zoom control to select Erase Current
5. Press button to enter the ERASE CURRENT sub-menu.
6. Use the zoom control to select
erase the current image, and returns to ERASE mode,
displaying the next available image.
--Select NO and press OK button to immediately returns to ERASE mode, leaving the current image without erasing.
, the most recent captured image will be shown on the LCD Display.
. Press button to

AUTO POWER OFF

Delay, min
3
ERASE MENU
Erase Current
Erase All
ERASE CURRENT
Erase Image
Number 0001?
Yes
No