Table of Contents
Advertisement
The LCD Brightness submenu allows the brightness of the Display LCD to be adjusted. Brightness can be adjusted over a
range of -5.0 to +5.0.
LCD BRIGHTNESS
+0.0
1. Pushing the Zoom Control to the left will decrease the brightness of the Display LCD by one step (-1.0).
2. Pushing the Zoom Control to the right will increase the brightness of the Display LCD by one step (+1.0).
3. Pressing OK saves the new brightness setting, and returns to the RECORD menu.
This option is also available under the PLAY menu.
The QuickView submenu allows the QuickView feature to be toggled on and off.
Enabling QuickView is useful when operating the camera with the LCD turned off, because it causes newly acquired pictures
to be displayed on the LCD for two seconds after being captured. During the two-second intervals, the picture just captured
may be deleted by pressing the OK button. The word "DELETE" will appear in the lower left corner of the LCD while the delete
option is available. After two seconds, the LCD will turn off again and the image is stored in memory. The image may still be
deleted later in ERASE mode.
QUICK VIEW
On
Off
1. Pushing the Zoom Control to move the highlight between On and Off.
2. Pressing OK saves the new setting, and returns to the RECORD menu.
White Balance allows you to obtain the highest color fidelity possible by taking into account the lighting conditions in which
the camera is operating. Set the appropriate white balance setting to remove the color cast that the current lighting conditions
add. The default Auto White Balance mode should work well under most normal lighting conditions. For those circumstances
where the Auto mode does not produce the desired result, one of several manual White Balance settings can be used,
depending on the ambient lighting conditions. The available settings correspond approximately to the following lighting
conditions:
Advertisement
Table of Contents
