Options; Settings - Zanussi ZDFN662W1 User Manual

6. OPTIONS

Desired options must be activated every
time before you start a programme.
It is not possible to activate or deactivate
options while a programme is running.
The option button toggles between the
available options and their possible
combinations.
Not all options are compatible with each
other. If you select non compatible
options, the appliance automatically
deactivates one or more of them. Only
the indicators of the still active options
are on.
If an option is not applicable to a
programme, the related indicator is off or
it flashes quickly for a few seconds and
then goes out.
Activating options can affect the water
and energy consumption as well as the
programme duration.

7. SETTINGS

7.1 Programme selection mode and
user mode
When the appliance is in programme
selection mode, you can set a programme
and enter user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse aid
empty notification.
• Activation or deactivation of the AirDry.
10 ENGLISH
6.1 GlassCare
This option protects a delicate load,
glassware in particular, from damaging. It
prevents rapid changes in the dishwashing
temperature of the selected programme and
reduces it to 45 °C.
How to activate GlassCare
Press until the indicator
The display shows the updated programme
duration.
6.2 ExtraPower
This option improves the dishwashing results
of the selected programme. It increases the
wash temperature and duration.
How to activate ExtraPower
Press until the indicator
The display shows the updated programme
duration.
The saved settings remain valid until you
change them again.
How to set the programme selection
mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the programme
duration.
After activation, the appliance is in
programme selection mode by default. If not,
is on.
is on.