1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Dishwasher
  5. ZDFN662W1
  6. User manual

Zanussi ZDFN662W1 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
zanussi.com/register
EN User Manual | Dishwasher
ZDFN662W1
zanussi.com\register

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZDFN662W1

Summary of Contents for Zanussi ZDFN662W1

  • Page 1 EN User Manual | Dishwasher ZDFN662W1 zanussi.com\register...

  • Page 2: Table Of Contents

    Welcome to Zanussi! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. PRODUCT DESCRIPTION................6 4. CONTROL PANEL..................7 5.
  • Page 3 • Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. • Children should be supervised to ensure that they do not play with the appliance. • Keep detergents away from children. •...

  • Page 4: Safety Instructions

    • If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.
  • Page 5 parts related to door assemblies, printed WARNING! circuit boards, electronic displays, pressure switches, thermostats and Dangerous voltage. sensors, software and firmware including reset software. The following spare parts 2.4 Use are available for at least 10 years after the • Do not put flammable products or items model has been discontinued: door hinge that are wet with flammable products in, and seals, other seals, spray arms, drain...

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Worktop Detergent dispenser Ceiling spray arm Lower basket Upper spray arm Upper basket Lower spray arm Cutlery drawer Filters Rating plate The graphic is a general overview. For Salt container more details, refer to other chapters or documents provided with the appliance.

  • Page 7: Control Panel

    4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is always off while the pro‐ gramme operates. Rinse aid indicator.

  • Page 8: Programmes

    5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, cut‐ Normal, lightly • Prewash • ExtraPower lery, pots, pans dried-on •...
  • Page 9 Programme Dishwasher Degree of Programme phases Options load soil • Prewash This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. This programme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.

  • Page 10: Options

    6. OPTIONS 6.1 GlassCare This option protects a delicate load, Desired options must be activated every glassware in particular, from damaging. It time before you start a programme. prevents rapid changes in the dishwashing It is not possible to activate or deactivate temperature of the selected programme and options while a programme is running.
  • Page 11 7.2 The water softener set the programme selection mode the following way: The water softener removes minerals from the water supply, which would have a Press and hold simultaneously negative effect on the washing results and on until the appliance is in programme selection the appliance.
  • Page 12 How to set the water softener level Water softener level Amount of water (l) Make sure the appliance is in user mode. 1. Press • The indicator still flashes. • The remaining indicators are off. • The display shows the current setting: e.g.

  • Page 13: Before First Use

    opens automatically during the drying phase CAUTION! and remains ajar. If children have access to the appliance, we advise to deactivate AirDry. The automatic opening of the door may pose a danger. How to deactivate AirDry Make sure the appliance is in user mode. 1.

  • Page 14: Daily Use

    8.2 How to fill the rinse aid How to fill the salt container dispenser 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time). 3.
  • Page 15 9.1 Using the detergent • When the programme is complete. • After 5 minutes if a programme was not started. Starting a programme 1. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. 2.

  • Page 16: Hints And Tips

    Press and hold simultaneously until the appliance is in programme selection If the door is opened for more than 30 mode. seconds during the drying phase, the running programme ends. It does not Cancelling the programme happen if the door is opened by AirDry function.
  • Page 17 10.2 Using salt, rinse aid and 6. Activate the rinse aid empty notification. detergent 10.4 Loading the baskets • Only use salt, rinse aid and detergent • Always use the whole space of the designed for dishwasher. Other products baskets. can cause damage to the appliance.

  • Page 18: Care And Cleaning

    After the programme is completed, water can still remain on the inside surfaces of the appliance. 11. CARE AND CLEANING WARNING! CAUTION! Before maintenance, deactivate the If unable to remove the foreign objects, appliance and disconnect the mains plug contact an Authorised Service Centre. from the main socket.
  • Page 19 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage...
  • Page 20 11.7 Cleaning the ceiling spray arm We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. The ceiling spray arm is placed on the ceiling of the appliance. The spray arm (C) is installed in the delivery tube (A) with the mounting element (B).

  • Page 21: Troubleshooting

    5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers.
  • Page 22 Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap. The display shows i30. • Make sure that the appliance is correctly installed. • Make sure the baskets are loaded as instructed in the user manual. Malfunction of the water level detec‐...
  • Page 23 Problem and alarm code Possible cause and solution The appliance trips the circuit-beak‐ • The amperage is insufficient to supply simultaneously all the applian‐ ces in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. •...
  • Page 24 Problem Possible cause and solution The interior of the appliance is wet. • This is not a defect of the appliance. Humidity condensates on the appliance walls. Unusual foam during washing. • Use the detergent designed specifically for dishwashers. • Use a detergent from a different manufacturer.

  • Page 25: Technical Information

    13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 598 / 850 / 622 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. MPa (bar) 0.05 (0.5) / 1 (10) Water supply min. 5 - max. 60 °C Cold water or hot water Capacity Place settings...
  • Page 28 156815621-A-432023...

Table of Contents