Safety - Husqvarna 325iL Operator's Manual

(Fig. 8) This product conforms to the applicable
UK regulations.
(Fig. 9)
Use approved protective gloves.
(Fig. 10) Use heavy-duty slip-resistant boots.
(Fig. 11) Only use nonmetallic flexible cutting
attachments.
(Fig. 12) Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
recycling facility.
(Fig. 13) The attachment can forcibly throw objects
that can bounce back. This can result in
yyyywwxxxx
(Fig. 18)
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
1857 - 005 - 05.10.2023
The rating plate shows the serial number. yyyy is the production year, ww is the
production week and xxxx is the sequential number.
The operator must ensure that no people or animals come closer than 15 metres.
When several operators are working at the same site a safety distance of at least
15 metres must be in effect.
Used if there is a risk of
Used if there is a risk of
serious eye injuries if the recommended
safety equipment is not used.
(Fig. 14) Disconnect battery before maintenance.
(Fig. 15) The product has protection against
splashing water.
(Fig. 16) Keep all parts of your body away from the
hot surfaces.
(Fig. 17) Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislations "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 17 .
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

General power tool safety warnings
WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
• Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Technical
Read all safety warnings,
7