Page 1
Network Indoor Station Installation Guide...
Page 2
Network Indoor Station Installation Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or Danger could result in death or serious injury. Indicates a potentially hazardous situation which, if not Caution avoided, could result in equipment damage, data loss,...
1 About this Manual Get the manual and related software from or the official website (http:// www.hikvision.com). Product Model DS-KH8350-WTE1,DS-KH8350-TE1 Network Indoor Station Scan the QR code to get the Scan the QR code to get the operation configuration guide for detailed guide for detailed information.
Network Indoor Station Installation Guide 2 Appearance Front Panel Figure 2-1 Front Panel Rear Panel Figure 2-2 Rear Panel...
Page 6
Network Indoor Station Installation Guide Note The Unlock key is valid only when does the indoor station speak with the • door station or open the live view of the door station. You can not use the debugging terminal. •...
Network Indoor Station Installation Guide 4 Wiring Description There are 20 pins in the terminal on the rear panel of the indoor station: 2 RS-485 pins, 2 power pins, 2 GND pins, 2 alarm output pins, 8 alarm input pins, and 4 reserved pins.
Network Indoor Station Installation Guide 5 Installation It supports wall mounting. There are two installation modes. 5.1 Installation Accessory Description The wall mounting plate is required when installing the indoor station on the wall. The dimension of wall mounting plate is shown below. Figure 5-1 Wall Mounting Plate 5.2 Wall Mounting Before You Start...
Page 10
Network Indoor Station Installation Guide 2. Put the indoor station on the holder of the wall mounting plate. Figure 5-2 Installing the Plate...