Advertisement
Note: If L-bracket is positioned directly over
mounting surface (see Figure 6), allow mini-
mum
⁄
" clearance between mounting sur-
1
4
face and L-bracket for cap screws and flat
washers to be installed in Step 4.
Minimum
⁄
"
1
4
Clearance
Figure 6. Example of L-bracket positioned over
mounting surface.
L-Bracket
Mounting Holes
Figure 7. Example of L-bracket positioned away
from mounting surface.
2. Drill holes at center of each marked position
according to size of fasteners to be used.
3. Position L-bracket over drilled holes and
secure with fasteners.
Model T33679 (Mfd. Since 3/23)
L-Bracket
Mounting Holes
4. Attach base of LED light to L-bracket with (4)
M5-.8 x 16 cap screws and 5mm flat washers
(see Figure 8).
x 4
Figure 8. LED light mounted on L-bracket.
Mounting with Clamping Bracket
Loosen the clamp handle until the mouth of the
clamp will slide onto the mounting surface. Tighten
the clamp handle until the clamp is secure, then
mount the light on the clamp using (4) M5-.8 x 16
cap screws and 5mm flat washers (see Figure 9).
x 4
Figure 9. LED light mounted on clamping
bracket.
Clamp
Clamp
Handle
-3-
Advertisement
