Table of Contents
Advertisement
C10M Series Splicing Controller
Double-click a separate monitor, pop up the "Change Monitor Name" dialog box, set the
"Association Matrix", "Input Port" and "Output Port" of the monitor and click OK to set
the matrix associated with the monitor. And its corresponding input and output ports. This
feature is used with matrix control, and the next section introduces Matrix Control.
4.6.4.2 Matrix control
You can enable the matrix control function module by checking the Matrix Control option
in the Function Module Configuration dialog box and clicking OK. When the matrix control
function module is turned on, functions such as "matrix", "matrix cascade", "matrix
switch", and "monitor input list" appear.
User Manual
Picture 113
Picture 114
Picture 115
70
Advertisement
Table of Contents
