Table of Contents
Advertisement
ACCESSORIES
SECTION 5: ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
T26688—8 Pc. R8 Quick Change Collet Set
These EOC-25 collets are hardened and ground
for maximum holding power and ultra precision.
Threaded for
⁄
"-20 drawbars, this set has a
7
16
maximum runout of 0.001". Set includes collet
chuck, spanner wrench, molded plastic case, and
collets of the following sizes:
⁄
", and 1".
3
4
Figure 38. T26688 8-Pc. R8 Collet Set.
order online at
-28-
⁄
",
⁄
",
⁄
",
⁄
",
⁄
",
1
5
3
1
5
4
16
8
2
8
www.grizzly.com
H7576—Precision Self-Centering Vise
Both jaws on this precision vise move in equal and
opposite directions so parts of various size remain
centered as long as vise remains centered to the
milling machine spindle. The precision-ground
dovetailed ways and an adjustable gib provide
ultra-smooth operation. The crank handle mea-
sures 4" long and slides on and off when needed.
Figure 39. H7576 Precision Self-Centering Vise.
SB1463—R8/JT33 Drill Chuck Arbor
SB1464—R8/JT6 Drill Chuck Arbor
SB1465—R8/JT3 Drill Chuck Arbor
Minimal deviation in concentricity is ground into
each and every one of these arbors to maximize
accuracy and performance. Total indicated run-
out is from 0.00059" to 0.00079". Takes
drawbar.
Figure 40. SB1463 R8/JT33 Drill Chuck Arbor.
1-800-523-4777
or call
Model G8689Z (Mfd. Since 07/23)
⁄
"-20
7
16
Advertisement
Table of Contents
