Section 5: Accessories - Grizzly G0720 Owner's Manual

SECTION 5: ACCESSORIES

Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
Catalog for other accessories available for
this machine.
H8179—Horizontal Milling Table
Figure 26.
Note Model G0619 Mill/Drill Shown
T10057—Tapping Attachment
Note: To use this tapping attachment on the
Model G0720 mill, you must purchase the G1427
R-8/ MT #2 Morse Taper sleeve.
G2861—Face Mill
G4051—Carbide Insert for Face Mill
H8179
Figure 27.
Figure 28.