Instrument and control functions
Rebound damping setting:
Minimum (soft):
2.8 turn(s) in direction (b)
Standard:
1.25 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
4
TIP
When turning the damping force ad-
juster in direction (b), it may turn be-
yond
the
stated
however such adjustments are ineffec-
tive and may damage the suspension.
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
Do not tamper with or attempt
to open the cylinder assembly.
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
specifications,
EWA10222
Auxiliary DC jack
1. Auxiliary DC jack cap
A 12-V accessory connected to the
auxiliary DC jack can be used when the
main switch is on.
NOTICE
The accessory connected to the
auxiliary DC jack should not be used
with the engine turned off, and the
load must never exceed 12 W (1.0 A),
otherwise the fuse may blow or the
battery may discharge.
To use the auxiliary DC jack
1. Turn the main switch off.
2. Remove the auxiliary DC jack cap.
3. Turn the accessory off.
4-30
1
EAU49454
ECA15432