Auxiliary Dc Jack - Yamaha FJR13ESM 2020 Owner's Manual

 Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
 Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
Instrument and control functions

Auxiliary DC jack

To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC jack
is not being used.
NOTICE
The accessory connected to the
auxiliary DC jack should not be used
with the engine turned off, and the
load must never exceed 30 W (2.5 A),
otherwise the fuse may blow or the
battery may discharge.
This vehicle is equipped with an auxil-
iary DC jack in the accessory box.
A 12-V accessory connected to the
auxiliary DC jack can be used when the
key is in the "ON" position and should
only be used when the engine is run-
ning.
To use the auxiliary DC jack
1. Auxiliary DC jack cap
4-42
WARNING
1. Open the accessory box lid. (See
page 4-34.)
2. Turn the key to "OFF".
3. Remove the auxiliary DC jack cap.
4. Turn the accessory off.
EAU39657
EWA14361
ECA15432
1
4