Using The Index Window Function.34 - Panasonic PT-L701 XU Operating Instructions Manual

Using the INDEX WINDOW function
This function lets you store a picture which is being projected into memory,
so that you can display a still picture and a moving picture on the screen.
©Press the INDEX WINDOW button.
You can also select INDEX WINDOW from
the MAIN MENU screen and then press the
ENTER button.
NOTE:
• The screen aspect ratio will become 2:3, and
the ratio of the height of the picture to its
width will become 1.5 times the normal ratio.
©Use the ▲ and ▼ buttons to set the screen height.
The vertical height can be set to one of three heights: xl, xl .5 and x2.
HH
Moving
Still Moving
Bi
picture
picture
picture
xl xl.5 x2
(Normal)
©Use the ◄ and ► buttons to switch between the still picture screen
(left) and moving picture screen (right).
—
Moving j
picture I
Moving
picture
©Press the ENTER button to store the picture in memory.
NOTE:
• When the screen size is changed, the picture's aspect ratio will also
change. Make sure that you fully understand the notes on SI signals
which are given on page 32 before using the index window function.
• When steps (D and © are carried out, the memory will be reset and a new
picture will be stored in memory.
34