Installing The Power Connector - Dell Vostro 15-3572 Owner's Manual

Installing the power connector

1. Insert the power connector into the slot on the computer.
2. Secure the power connector to the computer by using the screw.
3. Route the power connector cable.
4. Tighten the display hinge with M2.5x8 screw to the chassis
5. Install the:
a. System board
b. Memory module
c. Heat sink
d. Coin cell battery
e. WLAN Card
f. Base cover
g. Keyboard
h. Optical drive
i. Battery
6. Follow the procedure in After working inside your computer.
Disassembly and reassembly 35