Table of Contents
Advertisement
battery pack, or charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater, certain industrial
chemicals, and bleach or bleach-containing products, etc., can cause
a short circuit.
TRANSPORTATION AND STORAGE
■ Turn off the product, remove the battery pack, and allow both
to cool down before storing or transporting.
■ Remove all foreign materials from the product. Store the product
in a cool, dry, and well-ventilated place that is inaccessible to
children. Keep the product away from corrosive agents, such as
garden chemicals and de-icing salts. Do not store the product
outdoors.
■ For transportation in vehicles, secure the product against
movement or falling to prevent injury to persons or damage to
the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling when
transporting batteries by a third party. Ensure that no batteries can
come in contact with other batteries or conductive materials while
in transport by protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries that are cracked
or leaking. Check with the forwarding company for further advice.
MAINTENANCE
■ Use only original manufacturer's replacement parts, accessories,
and attachments. Failure to do so can cause possible injury, can
contribute to poor performance, and may void your warranty.
■ Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. Have the
product serviced by an authorised service centre only. When
servicing, use only original replacement parts.
■ Do not make adjustments and repairs that are not described
in this manual. For other repairs, contact an authorised service
centre.
■ After each use, clean the product with a soft, dry cloth.
■ Check all nuts, bolts, and screws at frequent intervals for
proper tightness to ensure that the product is in safe working
condition. Any part that is damaged should be properly repaired
or replaced by an authorised service centre.
■ Bring the product to an authorised service centre to replace
damaged or unreadable labels.
CLEARING A BLOCKAGE
■ To reduce the risk of injury associated with contacting rotating
parts, always turn off the product, remove the battery pack, and
make sure that all moving parts have come to a complete stop.
■ Remove the blower tubes to inspect for blockage. Clear the
tubes if required.
■ Reinstall the blower tubes before starting the product.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
18
hazards may arise during use, and the operator should pay special
attention to avoid the following:
■ injury caused by vibration
– Always use the right tool for the job, hold the product by
the designated handles and use the lowest speed necessary
to achieve the task.
■ injury caused by exposure to noise
– Wear ear protection and limit exposure.
■ injury caused by flying objects from the blower tube airflow
– Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from handheld tools may
contribute to a condition called Raynaud's Syndrome. Symptoms
may include tingling, numbness, and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these symptoms.
There are measures that can be taken by the operator to possibly
reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating the
product, wear gloves to keep the hands and wrists warm. It is
reported that cold weather is a major factor contributing to
Raynaud's Syndrome.
■ After each period of operation, exercise to increase blood
circulation.
■ Take frequent work breaks. Limit the amount of exposure per
day.
If you experience any of the symptoms of this condition, immediately
discontinue use and see your physician.
WARNING! Injuries may be caused or aggravated by prolonged
use of the product. When using the product for prolonged periods,
ensure to take regular breaks.
SYMBOLS ON THE PRODUCT
Read and understand all instructions before
operating the product. Follow all warnings and
safety instructions.
Beware of thrown or flying objects. Keep all
bystanders, especially children and pets, at least 15
m away from the operating area.
Rotating fans. Keep hands and feet out of openings
while the product is running.
Wear ear protection.
18
SY
The
the
Advertisement
Table of Contents
