Advertisement
■
Operate the product in a recommended position and only on a
8B
firm and level surface.
■
Do not operate the product on a paved or gravel surface where
DC
ejected material could cause injury.
m/h
■
Before each use, always inspect the housing for damage.
m
/h
3
Ensure that guards and handles are in place and properly
secured. Replace worn or damaged components in sets to
PM
preserve balance. Replace damaged or unreadable labels.
4 kg
■
Never operate the product while people, especially children, or
pets are nearby.
B(A)
■
Keep all cooling air inlets clear of debris.
■
Use rakes and brooms to loosen debris before blowing.
dB
■
Clear the work area before each use. Remove all objects such
B(A)
as rocks, broken glass, nails, wire, or string which can be blown
dB
a considerable distance by high velocity air.
m/s
2
BATTERY TOOL USE AND CARE
m/s
2
■
Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
■
Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and
fire
■
When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other
small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may
cause burns or a fire.
■
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
■
Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behaviour resulting in fire, explosion, or risk of injury.
■
Do not expose a battery pack or tool to fire or excessive
temperatures. Exposure to fire or excessive temperature above
130°C may cause explosion.
a of
■
Follow all charging instructions and do not charge the battery
pack or tool outside the temperature range specified in the
the
instructions. Charging improperly or at temperatures outside
the specified range may damage the battery and increase the
risk of fire.
the
OPERATION
y for
■
Operate the product only at reasonable hours – not early in the
morning or late at night when people might be disturbed.
uct.
jury
■
Never operate the product in an explosive atmosphere.
ise,
■
Avoid using the product in bad weather conditions especially
when there is a risk of lightning.
uct.
■
Do not operate in poor lighting. The operator requires a clear
ully
view of the work area to identify potential hazards.
not
■
Use of hearing protection reduces the ability to hear warnings
d by
(shouts or alarms). The operator must pay extra attention to
hard
what is going on in the working area.
■
Do not get distracted and always concentrate on your task.
wear
■
Operating similar tools nearby increases both the risk of hearing
ot or
injury and the potential for other persons to enter your working
ting
area.
■
Keep firm footing and balance. Do not overreach. Overreaching
into
can result in loss of balance.
el to
■
Always be sure of the footing on slopes. Walk, never run.
ces
■
Keep all parts of your body away from any moving part. Rotating
oes
impeller blades can cause severe injury.
■
Never run the product without the proper equipment attached.
■
Do not operate the product without both the nozzle and lower
tube attached.
■
Do not modify the product in any way or use parts and
accessories that are not recommended by the manufacturer.
WARNING! If the product is dropped, suffers heavy impact,
or begins to vibrate abnormally, immediately stop the product
and inspect for damage or identify the cause of the vibration. Any
damage should be properly repaired or replaced by an authorised
service centre.
■
To reduce the risk of injury associated with contacting rotating
parts, always stop the product and remove the battery pack.
Make sure all moving parts have come to a complete stop:
●
before leaving the product unattended
●
before clearing blockages
●
before checking, cleaning, or working on the product.
●
to inspect the product after striking a foreign object.
■
Immediately switch off and remove the battery pack in the event
of accident or breakdown. Do not operate the product again
until it has been fully checked by an authorised service centre.
BLOWER SPECIFIC SAFETY WARNINGS
■
Wear a face filter mask in dusty conditions to reduce the risk of
injury associated with the inhalation of dust.
■
Slightly dampen surfaces in dusty conditions.
■
Do not point the blower nozzle in the direction of people or pets.
■
Never place objects inside the blower tubes.
■
Do not operate the product near open windows.
■
Use the full blower nozzle extension so that the air stream can
work close to the ground and perform effectively.
■
Do not place blower on top of or near loose debris. Debris can
be sucked into the intake vent, resulting in possible damage to
the product.
TRANSPORTATION AND STORAGE
Stop the product, remove the battery, and allow it to cool
before storing or transporting.
Clean all foreign materials from the product. Store the product in a
cool, dry, and well-ventilated place that is inaccessible to children.
Keep away from corrosive agents, such as garden chemicals and
de-icing salts. Do not store outdoors.
For transportation in vehicles, secure the product against movement
or falling to prevent injury to persons or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling when
transporting batteries by a third party. Ensure that no batteries can
come in contact with other batteries or conductive materials while
in transport by protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries that are cracked
or leaking. Check with the forwarding company for further advice.
MAINTENANCE
WARNING! Use only original manufacturer's replacement
parts, accessories, and attachments. Failure to do so can cause
possible injury and poor performance, and may void your warranty.
WARNING! Servicing requires extreme care and knowledge
and should be performed only by a qualified service technician. For
15
15
Advertisement
