Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
Portable Toilet
Product specification:
SKU
BFTLPT-0001
1. 10 litre capacity/waste holding tank.
2. Fresh water capacity provides up to 50 flushes.
3. Always flushes with clean water, no water is recirculated completely
self-contained, no external water or power connections required.
4. Attractive matte finish conceals scratches, clean by scrubbing without damage.
5. Heavy duty, corrosion resistant side latches lock tanks together.
2
Advertisement
Related Manuals for YitaHome BFTLPT-0001
Summary of Contents for YitaHome BFTLPT-0001
- Page 1 ASSEMBLY INSTRUCTIONS Portable Toilet Product specification: BFTLPT-0001 1. 10 litre capacity/waste holding tank. 2. Fresh water capacity provides up to 50 flushes. 3. Always flushes with clean water, no water is recirculated completely self-contained, no external water or power connections required.
-
Page 2: Product List
1. Please always assemble according to the instruction. 2. Ensure water supply pressure is no more than 0.4Mpa. 3. Hot water more than 40 degrees is forbidden. Product List BFTLPT-0001 Toilet OPP package of each product contains: Sealed ring of waste cover Toilet lid buckle... -
Page 3: Use & Operation
ASSEMBLY INSTRUCTIONS Caution: ① Place on smooth ground ② Ensure all latches are locked ③ Ensure the waste holding tank is assembled correctly and the cap is screwed on correctly. ④ Bearing weight limit is no more than 200 kg ⑤... - Page 4 ASSEMBLY INSTRUCTIONS...
- Page 5 ASSEMBLY INSTRUCTIONS Clean Operation: 1. Empty Waste Holding Tank. 2. The waste holding tank has a 10 litre capacity, it should be emptied when contents reach approximately 2cm below the stide valve. 3. Make sure that the slide is pushed in completely before separating the waste holding tank and then release the latches on both sides,hold fresh water holding tank with both hands and move it from above of the waste holding tank.
-
Page 6: Maintenance And Storage
ASSEMBLY INSTRUCTIONS Assembling of Portable Toilet 1. Place waste holding tank in horizontal position and make sure that the sealed circle is in its proper position, hold fresh water holding tank with both hands,unfold latches outward and place the fresh water limber hole to the centre of waste holding tank's slide valve, making sure of a good seal. - Page 7 ASSEMBLY INSTRUCTIONS Thank you for your reading with great patience! If you have any questions about the installation of Yitahome's Portable Toilet, just e-mail us at yitahome@outlook.com.