Clear All Data; Reset Procedure; When Trouble Occurs - Sharp YO-250M Service Manual

Table of Contents

Advertisement

ZQ-2500SP
4. Remove the security screw fixing the movable arm. (Fig. 2)
6. Install the new battery with the (+) side facing up.
9. Press the RESET switch.
If nothing appears on the display, adjust the contrast to darken the
display (see pg. 4 in the instruction book.) If still nothing appears
still, repeat the battery replacement procedure.
\f meaningless
characters or symbols appear on the display,
repeat the battery replacement procedure.
6. Reset procedure
When trouble occurs
An impact or a strong external electrical field may stop the keys from
functioning. Press the RESET switch with the tip of a ball-point pen or
similar object, but not anything breakable
(like a pencil point or a
_ needle).
The impact or external electrical field may erase some or all of the
Organizers memory. Press the RESET switch on the back of the
Organizer.
All RESET operation
If a problem occurs after replacing the batteries, or if the Organizer
does not function properly even after the above RESET operation,
perform the following:
1. While holding
, press the RESET switch on the back.
Release the RESET switch and then release [ON].
The following display will appear.
CLEAR ALL DATA
OK (Y/N)?
2. Press [N].
7. Using the data transfer function
This Organizer can transfer data to and from the following models.
® Other YO-250M/260M,
ZQ-2550M/2750M/2500/2700
Organizers
using the optional CE-200L or CE-300L cable.
¢ The 02-8000, OZ-7000, ZQ-5000, ZQ-2000, YO-600/Y0-610/YO-
620, YO-380/YO-370/YO-350, YO-300/YO-310, and YO-200/YO-
210 Organizers using the optional CE-200L or CE-300L cable.
© The YO-100/110, EL-6100 series and EL-6260 Organizers (includ-
ing Auto Dialer) using the optional CE-220T cable.
Transferable data varies according to the model connected to the
Organizer.
[Soede| Tel_[ Memo | Aniverar_[ Bunce
Yes
Yes
_
_
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
_
~
=
Yes
There may be some data transfer restrictions between these models.
Before connecting the cable and transferring data bewseen Or-
ganizers, turn off both units.
OZ-8000 series*
OZ-7000 series
ZQ-5000 series
ZQ-2000 series
YO-600/Y0-610/Y0-620
YO-250M/YO-260M
YO-350CP/YO-370CP/
YO-380/YO-200/Y0-210
YO-100/YO-110
EL-6100 series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yo-260mZq-2550mZq-2750mZq-2500Zq-2700

Table of Contents