Table of Contents
Advertisement
3) The cleaner body will come apart, into 4) Hold the dust collector with left hand,
the dust collector and the motor
grip knob on filter frame firmly with
case.
right hand.
Dust collector
Motor case
Rubber gasket
5) Pull filter up and twist filter frame back
and forth (approx 20 times). Fine dust
particles will be loosened from the
filter dropping into the dust collector.
7) Dispose of the dust accumulated in
the dust collector as shown.
9) To re-assemble the cleaner body, fit
the protrusion on the edge of the dust
collector into the slit on the lower edge
of the motor case. Push the two parts
together until the clamp button clicks
into place. The two parts will then be
locked together.
6) Lift the filter assembly from the dust
collector as shown.
8) Put the filter back into the dust
collector. Make sure that the rubber
gasket around the filter does not
protrude over the edge of the dust
collector.
Dust collector
Motor case
Advertisement
Table of Contents
