Table of Contents
Advertisement
4. The vacuum power adjustment ring (VB 30, VB 31)
The full vacuum power of the cleaner
may be too strong in certain cases,
for instance when vacuuming curtains
and draperies. In these cases, turn
the vacuum power adjustment ring
(on the hose) to control the vacuum
power. Match the hole in the ring with
the hose hole to reduce the power.
Vacuum power
adjustment ring
How to use
1. Empty the dust collector before it
becomes completely filled. Frequent
emptying lengthens the life of the
motor and maintains strong suction
power.
2. Before using the blower, make sure
that the hose and wands are free of
dust. (VB 30, VB 31)
3. When cleaning rough and uneven
surfaces, pull the floor tool toward
you while vacuuming.
4. If the cord should stop during
rewinding, pull it out a little and twist
the cord reel button again. (VB 30,
VB 31)
5. Large pieces of waste and long
objects block the hose. Remove
them before vacuuming.
6. Use the crevice tool to suction off
dust collected on the bristles of the
floor tool. A coarse comb can also
be used.
Functions of each part
1. The Switch
Press the ON side of the switch to
start the motor.
To stop the motor, press the OFF
side of the switch.
2. The Dust Indicator (VB 30, VB 31)
The dust indicator shows the amount of dust that has collected in the dust
collector. Hold the floor tool away from the floor, while operating, to check.
VB 31
ORANGE
BROWN
VB 31
Suction power
decreases. Dust
collector should
be emptied.
11111111111S1
Vacuuming can
continue
VB 30
RED
BLUE
VB 30
Advertisement
Table of Contents
