Reverse Projection - Honeywell Elmo FP8-C How To Use Manual

reverse projection
The projector may be put into reverse operation
at any time during projection by following this
procedure:
1. Turn off the motor.
3. After completing reverse projection, turn the
motor switch to OFF before resuming normal
forward projection.
Single Frame Still Projection
During projection, you may wish to stop the
movie to show a single frame. This may be done
by turning the motor switch to STILL. Some-
times the film will stop in the middle of a frame,
or even when the aperture is closed. When this
happens, simply turn the threading knob until
the full frame is projected on the screen. Since
the Dual-8 Projector has an excellent cooling
system, prolonged
still projection
is possible
without harming the film.