Oven Light Bulb; Oven Door; Removable Oven Racks - Kenmore 911. 41485 Owner's Manual

CARE ANDCLEANING
RemovableParts
_ isconnect electrical power
to the oven at the main
circuit breaker or fuse box
before attempting to replace the
oven light bulb. Do not touch a hot
light bulb with wet hands or a wet
cloth. Wait until the bulb is cooled
and use a dry cloth.
Live
Bulb Collar Socket
Bulb Cover
TO REMOVE THE COVER
1. Disconnect electrical power to the oven
at the main circuit breaker or fuse box.
2. Hold your hand under cover and firmly
twist cover.
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it with
a 40-watt appliance bulb.
TO REPLACE COVER
1. Place the bulb cover into the groove of
the bulb socket.
2. Reconnect the electrical power to
the oven.
TO REMOVE
Open the door to the broil
stop position. Grasp the
door on each side and lift
up and off the hinges.
DO NOT LIFT THE
DOOR BY THE
HANDLE.
When the door is removed
and the hinge arms are in
the broil stop position, do
not bump into the hinge arms. They
could snap back and cause injury
to hands and damage the
porcelain finish of the front frame.
Cover the hinge arms with empty
paper towel rolls or towels while
working in the oven area.
TO REPLACE
Removethe paper towelrolls
or towels.Make surethe
hingesare still in the broil stop
position.Graspthedoor on ,_.,,_p_.
each side. Lift the doorover
each hinge.Linethe slots at
the bottomof the doorwith the hinges,Slidethe
doordown over the hinges as far as it will go.
Raised Back
of the Rack
TO REMOVE
1. Pullthe racks out to
the stop lock
2. Pull up the frontof the
rack and slide under
the bump of the rack
guide,
TO REPLACE
Bump in
Rack Guide
1. Placethe raised back of the rack ontothe
rackguides.
2. Lift the front of the rack untilthe raised back
slides under the bump of the rack guides.
3. Slidethe rack all the way back.
28