Advertisement
Using
Power Equipment
With Workmate®
Work Center
Construct individual mounting
boards for your power tools to save
workbench space.
CAUTION: Securely mount tool
accessories to mounting board with
screws or bolts. Always wear safety
glasses when using power tools with
the Work Center.
Power Tooi
Mounting Board
Attachments
such
as Black &
Decker
Vertical Drill Stand and the
Horizontal
Drill Stand may be attached
with
screws to a suitable sized piece
of plywood to the underside of which
a
block of wood is attached. The block,
when gripped securely in the Work
Center vise jaws, provides rigidity for
the operation of the tools in the
attachments.
Suggested Sizes
A. Mounting Board 12" x 12" x 3/8"
B. Vise Block 2" x 4" x 6"
C. Retaining Board 3" x 3" x 1/4"
D. Bolt 5"
IIII
The
block of
wood on the
underside
of the mounting
board is
held in the jaws
of the
Work Center.
The power
tool
is secure for use.
Add power tools you thought you
never had room for. Securely holds
even the larger tools.
You'll want to use all
of your
power tool accessories
more often.
For instance, buffing—it's
easier and
more
convenient with
the Workmate®
Work
Center.
m
General
Purpose Table
Suggested Sizes
2' X 6'
X
1 /4*' plywood
2" X 4" stud. 30" long
4 bolts 5" long
CAUTION: Do not use nails or
screws. Use bolts. Center table top
over center of vise jaws.
When the project calls for extra
work space, you can make a work
table by attaching a block of wood to
the underside of a piece of plywood.
This makes an extra long table
surface for a work or play occasion.
Center table over center of vise jaws
and securely clamp block on bottom
of table.
•*»//
9
Advertisement
