Advertisement
Setting Up
Workmate®
Work Center
(cont)
To raise the Work Center to its full
workbench height of 30-5/8" extend
the 4 base legs.
Fig, 13
IM
4. Close unit
and clamp in locked
position.
5. You can now
store Workmate®
conveniently
in minimum space.
■ ; y" >
Groove -
Locking
^
Knob
^
(obscured by table)
Release-
Latch
Always make sure that each leg
is swung into its extended position.
This will ensure safe use of the Work
Center at this upper working height.
HotM To Store
Your Workmate®
Work Center
1
, Fold in
all
four base
legs.
2 Place one foot on footboard.
3. Using index fingers, simultaneously
press release latches, then pull top
toward you.
Holding
Irregular Shapes
With Workmate®
Work Center
Using the swivel pegs In the
appropriate holes and the
independent action of both vise
handles, the Work Center can secure
the most irregular shapes. Lets you
grip objects that used to be impossible
to hold.
Rotate swivel legs to accept
irregular shapes. Outside swivel pegs
extend vise capacity for a 30"
diagonal grip.
Fig. 16
K''v
Footboard -
(No Step)
Sawhorse —
(Height 24")
Folding -
Legs
Workbench —-
(Heighi 30-5/8")
Working With
Your Workmate®
Work Center
The Work Center is a vise.
sawhorse andworkbeticliAlliD^^^_
Its basic design and special features
help you perform a complete range of
workshop
tasks from the simplest to
the most complicated.
Fig. 17
6
Advertisement
