Pioneer KEH-P7200RDS EW Service Manual page 8

{25) Attenuator
Press to reduce the volume to 1/10 of its
current setting (The "ATT" display blinks.).
Pressing again returns the volume to its
original level.
* This function is available using the re-
mote controller unit only.
Operating Radio
{17] Band
Band changes.
[19] Preset Channel
Press to tune the frequencies assigned to
the preset button memory. Pressing the (a)
side tunes in the next high preset button
number, while (w) tunes in the next lower
preset button number. The preset number
changes at high speed when you hold ei-
ther side of this button down.
[20] Seek Tuning
Press either the (<<) side or the (me) side.
When the () side is pressed, the tuner
will automatically receive high frequencies.
When the (<<) side is pressed, it will auto-
matically receive low frequencies.
[24] BSM
Press this button for 2 seconds or more to
switch the BSM function ON and OFF.
Using the Clock Display
Parts Identification
Fig.1
(4] © Hour adjustment
(4] @ Minute adjustment
[4] @ Clock reset
[8] Clock
Displaying the Time
The clock is displayed when button [8] is
pressed. Press button [8] again to switch off
the clock display.
* The clock display can be used only when
the head unit is in operation.
* When the clock is being displayed, press-
ing any other button will end the clock
display. The clock will be displayed again
about 25 seconds after the last button is
pressed.
Adjusting the Time
Adjusting Hour
While holding down button [8], press button
@ in Bank [4] to adjust the hour setting. Each
time button © in Bank [4] is pressed, the
hour advances by one hour.
Holding down button © in Bank [4] ad-
vances the hour at high speed.
Adjusting the Minutes
While holding down button [8], press button
@ in Bank [4] to adjust the minute setting.
Each time button @ in Bank [4] is pressed,
the minute advances by one minute.
Holding down button @ in Bank [4] ad-
vances the minute at high speed.
Operating Tape
{17} Program
Press this button to change the side of tape
from A to B or vice versa.
[20] Fast Forward/Rewind
Press the (me) side for fast forward and the
(<4) to rewind the tape. Press this button
twice to perform the music search opera-
tion, and a third time to return to normal
playback.
Operating the CD Player
¢ This function only works when this unit is
connected to a separately sold multi-piay
CD player (CDX-P1210, CDX-P610).
[17] Multi-play COD player selector
Multi-play CD player changes.
* This function only works when this unit is
connected to 2 or more multi-play CD
players.
{19] Disc Number Search
Used to specify the number a disc loaded in
the magazine. Press the (a) side to increase
the disc number on the display, and the (w)
side to reduce the disc number.
[20] Track Number Search
Press to search for a selection (track num-
ber) on the current disc. Press the (mm) side
to increase the track number on the display,
and the (<4) side to reduce the track num-
ber. Holding down either side of this button
changes the track number at high speed.
¢ After the minute is adjusted, the clock will
start from 0 second when button [8] is re-
leased.
Adjust the clock with the "immediate clock
adjustment"
Hold down button [8] and press button @ in
Bank [4]. The time becomes "OO:00".
tf the "minute" indication is 00 to 29, it is
discarded, and the clock starts.
(Example: If the time is "10:18", it be-
comes: * 10:00").
lf the "minute" indication is 30 to 59, it is
rounded up, and the clock starts.
(Example: If the time is "10:36", it be-
comes " 11:00").
KEH-P7200RDS,P71IOORDS,PG2Z2OORDS ,PGIOORDS ,P25RDS,PiISRDS
Disc Title Input (Entering Titles)
You can enter a title for the disc in the mul-
ti-play CD player. This title stored for the
disc can be displayed.
Buttons [19] and [20] on the remote con-
troller have the same functions as buttons
[1} and [2] on the head unit, respectively.
(See the section "Disc Title input".)
Learning Function
Fig.1
[13] Learn changeover button
Fig.2
[16] Learn Button
Records one button from the head unit on
the remote control's learn button. This can
be convenient when a button which is used
often is recorded.
1.Holding down button [13] for at least 2
seconds displays "LEARN" for about 8
seconds.
2.Press the button on the head unit that you
want to use on the remote control.
3.Press the learn button [16] on the remote
controller unit. The head unit button
recorded can now be used from the re-
mote control.
Store the button memory while
"LEARN" is displayed. Once that
"LEARN" display goes out, nothing can
be stored into the button memory.
Playing Compact Discs
Precautions When Using the Multi.
Play CD Control
lf the IP-BUS extension adapter is used,
up to 4 multi play CD players can be con-
nected. When 2 or more CD players are
connected, their priorities must be speci-
fied for the Multi-play CD players. See the
Multi-play CD players instructions and se
the address switches correctly.
Use this unit with optional multi-play CD
players (CDX-P1210, CDX-P610).
\f 2 or more multi-play CD players are
connected to the unit, you can select the
CD player to be played.
Each press of button [12] switches be-
tween the CD players and magazine num
ber [47] on the display.