Pioneer KEH-P7200RDS EW Service Manual page 11

1.Select the desired ITS play mode (repeat
mode).
2.Hold down button @ in Bank [14] for
more than 2 seconds. ("ITS.P" appears
on the display [53}.) To cancel ITS play,
hold down button @ in Bank [14] again.
(*ITS.P" disappears.)
When you play a disc that has no tracks
programmed, "EMPTY" will appear on
the display [53] for about 2 seconds, indi-
cating that ITS play is not possible.
You can perform scan play or random
play during ITS play. In this case, scan
play or random play applies to all the
tracks stored in memory. (If the play
mode is the magazine repeat mode or all
repeat mode, scan play applies to all the
tracks of the discs in the magazine stored
in memory.)
During ITS play, multi-play CD players
containing discs with programmed tracks
are switched, and disc and track number
search is performed on programmed
tracks.
Entering Titles
1.Select the disc for which you want to en-
tera title.
2.Hold down button @ in Bank [14] for
more than 2 seconds to select title input
mode.
3.Press the (<4) or (P) side of button [2) to
select the input position. The input posi-
tion moves continuously when you hold
down either side of the button.
————.
Fig. 9
4.Select characters using the (+) or (-) side
of button [1]. When you hold down either
side of the button, the character changes
continuously. Each press of the (+) side
changes the character from "A — B ~
C...", while each press of the (-) side
changes the character from "C ~ B — A".
To enter a space, press the space sign
(_).
5.Enter all characters by repeating steps 3
and 4.
Press button @ in Bank [14] to store them
in memory.
The title will appear on the display.
Erasing the [TS Program
You can erase one or all selections of the
program for the disc being played by ITS.
To erase a single selection:
1.Start ITS play.
2.Play the track you wish to erase by using
disc number search or track number
search.
3.Hold down button © in Bank [14] for
more than 2 seconds.
To erase the disc program:
1.Start normal play.
2.Play the disc you wish to erase by using
disc number search.
3.Hold down button © in Bank {14} for
more than 2 seconds to erase the pro-
gram. ("CLEAR" appears on the display
{53} for about 2 seconds.)
Pausing
1.Press button ® in Bank [14] to pause dur-
ing disc playback ("PAUSE" appears on
display [53)).
2.Press button © in Bank [14] again to re-
lease pause.
¢ You can select a track using the track
number search during pause. ("PAUSE"
is off while a track is being searched.)
When the track search ends, the found
track is paused at its beginning.
Disc Title List
You can list all discs loaded in the maga-
zine being played. This function is conve-
nient for checking discs in the magazine
being played.
Each press of button © in Bank (14) dis-
plays the titles of the discs in magazine
being played in ascending order of disc
number.
The disc title is displayed for about 8 sec-
onds, then the normal operation display
returns.
* Nothing is displayed for discs having no
titles.
¢ Trays with no discs are skipped.
Select the disc to be played from the disc
list display.
1.Press button @ in Bank [14] to display the
disc title.
2.When the title of the disc you want to lis-
ten to is displayed, press button @ in
Bank [14]. That disc is played.
Display eetiati |
Each press of button @ in Bank [14] switch-
es the display (53) between the elapsed
play time and disc title.
When you press button [12] while the disc
title is being displayed, the normal opera-
tion display will appear for 8 seconds.
Disc Title input
You can enter a title for the disc in the
multi-play CD player. The title stored for the
disc can be displayed.
* The ADPS function* of the multi-play CD
player lets you enter titles for up to 100
discs. (Up to 100 discs, including ITS, can
be programmed.)
*"ADPS: Automatic Disc Program Selection
A disc title can consist of up to 8 charac-
ters for a single disc.
When the number of discs exceeds 100,
discs not being played (information not
being renewed) in memory is overwritten
by the newest.
One title is stored for each disc. The title
stored for a disc is not erased after the
disc is changed.
CD sound quality adjustment func-
tion
If you connect a Multi-play CD player with
COMP (Compression) and D.B.E. (Dynamic
Bass Emphasis) functions to this unit, you
can use these functions with this unit. (If
you connect a Multi-play CD player that
does not feature these functions, even if
you try to switch to these functions,
"NO COMP" is displayed, indicating that
switching is not possible.)
COMP (Compression) function
This function suppresses loud sounds
while boosting quiet sounds to reduce the
difference between the 2.
Use this function if there is distortion when
you raise the volume.
When the COMP function is ON, * COMP"
[49] lights in the display.
D.B.E. (Dynamic Bass Emphasis) fainction
When listening in a car, bass sourtd may
be insufficient. This function boosts bass.
When the D.B.E. function is ON, ' DBE" [50]
lights in the display.
COMP and D.B.E. switching
You can switch between 2 COMP and
D.B.E. ievels.
Level switching of both functions at the
same time is not possible.
1.Press button @ in Bank [14] for 2 or more
seconds to select the switching enode.
2.Each time you press button @ irs Bank
[14], the mode changes as follows.
COMP OFF ~ COMP 1 — COMP 2-~
COMP OFF — DBE 1— DBE 2 ~ COMP OFF
* With both COMP and D.B.E., the second
mode is more effective.
11