Auto Exposure Bracketing - Canon EOS 1 Instructions Manual

O. Auto Exposure Bracketing (AEB)
Use auto exposure bracketing to produce a se-
quence of three pictures to vary the rendition
of the subject intentionally by changing the ex-
posure. The range of bracketing is up to
+
1- 3
steps in 1/3-step increments. You control the
timing of shutter release for each individual ex-
posure in the AEB sequence.
-Auto exposure bracketing is impossible with a
flash .
1) Open the palm door and press both the film
winding mode selector and the battery check
button simultaneously to display "AEB" in the
display panel.
-The display will stay on for approximately
six seconds so you can remove your fingers
from the buttons.
2) Turn the main dial to the desired bracketing
amount. If you set 2 in the display panel , for
example, you can take three exposures in the
sequence of - 2 steps, normal, and
+
2
steps over the correct exposure according
to the camera's meter.
nn
U.U
D
)
49