Film Speed Setting - Canon EOS 1 Instructions Manual

20
Pilm Speed Setting
The film speed for DX-coded film is automati-
cally set according to the code on the cartridge
from ISO 25-5000. The film speed will appear
in the display panel while the film advances to
the first usable frame.
For non OX-coded film, set the film speed from
6-6400 by pressing both the AF mode and
metering buttons while turning the main dial until
the desired speed appears.
To override the OX-cOde setting , please set Cus-
tom Function
#
3 on p. 56. This will cancel the
automatic setting for manual input.
• When using non-OX film
cartridges,
the
previously set film speed blinks in the dis-
play panel to warn that the correct film
speed may not have been set. This warn-
ing stops after the two buttons marked "AF"
and " METERING" on top of the camera
have been pressed. If you want to change
the ISO setting , turn the main dial while
pressing these buttons.