Troubleshooting Guide - Kenwood KRC-603C Instruction Manual

Troubleshooting Guide
PROBLEM
POSSIBLE CAUSE
SOLUTION
Turn off Attenuator
side
Reset the fader or balance settings.
The cassette tape is bad.
Nothing happens when the but-
tons are pressed.
The sound quality is poor or dis- The tape head js dirty,
. torted.
One of the speaker wires is being pinched by a screw in
the car.
The speakers are not wired correctly.
The antenna control wire is not connected.
The battery wire has not been connected to the proper
terminal.
The memory is erased when
the ignition is turned off.
Press the reset button on the unit (see p. 4).
Check the speaker wiring.
Pull the antenna out all the way.
27