Ccrs (Computer-Controlled Cd Recording System) - Kenwood KX-W5040 Instruction Manual

Recording of CD playback (CCRS)
About CCRS (Computer Controlled CD Recording System)
When connected with a KENWOOD CD player provided with '' (XX '' marking through the system control cord, this unit al-
lows to used the CCRS (Computer-controlled CD Recording System), which starts recording automatically after setting the
optimum recording level for the CD and tape to be used in recording.
CCRS (Computer-controlled CD Recording System)
When the CCRS key is pressed, the following operations occur automatically and CD sound is recorded on tape.
mined and set based on the peak value sampled.
3.The recording preparation steps above take about 20 ~ 200
seconds, after which the actual recording starts.
4.After recording (when the CD player is stopped or when
CD player
the tape has run out), both the cassette deck and CD play-
er stop.
® With CD players equipped with the EDIT function, it is possible to make recordings in which the last songs on sides A and B are not cut
off in the middle and in which the recording capacity of the tape is used to the fullest extent. (Set the DIRECTION switch of the deck to'' => ".)
M@ CCRS recording (deck B only)
Set the input selector switches of the am- Amplifier or Receiver
plifier (receiver) for the CD source.
O- =O
a
°
Oo es eosomoeso l= O
Audio cord | System
(ecm
cord
Place a CD in the CD player.
@ When edited recording is required, press the EDIT key on
the CD player.
Insert a tape in deck B.
Press the CCRS key.
[ronMac [nich] [NORMAL] nigh]
CCRS CCRS
Audio cord
Normal speed Double speed
When this unit is connected to KENWOOD DP-R792, press
the SPEED key so that the SPEED indicator goes off.
When performing CCRS recording with a CD player which can
be loaded multiple compact discs, set the CD player to TRACK
mode, press the disc select key and press the CCRS key.
The Dolby NR does not work if the HIGH key is pressed.
The CCRS indicator blinks, and actual! recording starts in
about 20 to 200 seconds (after creating a non-recorded
blank of about 8 seconds).
How to cancel CCRS
During recording level setting: : During CCRS recording: After completion of CCRS recording:
Press the Stop key of the CD Press the Stop key of the CD Press the OPEN/CLOSE key of
player or the stop key of the cas- player, then press the OPEN/ the CD player.
sette deck. CLOSE key of the CD player.
@ After completion of CCRS recording, be sure to cancel the CCRS and ensure that the CCRS indicator has gone off.
@ After recording, the cassette deck and CD player enter the stop mode automatically.
18 kx-weo40 (En)