Changing The Channels - Sharp LC-20B2UA Operation Manual

BASIC OPERATION (Continued)
Changing channels by using Channel Select on the remote control
• This LCD TV set a]lows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
or 3-digit number.
w
--Channel
Select
To select a 1- or 2-digit channel
number (e.g., Channel 5):
Complete the following procedure
within 4 seconds.
1 Press the _ button.
2
Press the @ button.
• When selecting a 1-digit channel number
do not fail to press the @ button first.
0-1
1--]
11-
115
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
1 Press the _ button.
2
Press the _ button.
3 Press the ® button.
• The 3 -digit channel number can be
selected only when the receiving mode is
set to CABLE in CH-SETTING. (For details
on setting the receiving mode, see page
25.)
Changing channels with OH (^)/(v) on the remote control
Air Press OH (A) and the channels change in the order shown below:
2-e 3-e... -> 68 -e 69 -e 2 -e 3 -->, . .
Press CH (v) and the channels change in the order shown below:
3-->2-->69-->68-->... =e 3-e 2 -->, . .
Cable Press CH (A) and the channels change in the order shown below:
1 -e 2-e 3-e.., -e 125-el -->2-->3-->...
Press CH (v) and the channels change in the order shown below:
3-->2-->1 -e 125-e,,, -e 3-_ 2-e 1 -e...
el=