Samsung AC Series Install Manual page 123

Set up screen when installing Side by Side, Method 2 – LSM
□ Settings for each SET
① Setting IP
2) Setting SET
- Use the remote control to configure the IP according to the scenario below.
- Sets IP to be different between SETs.
1) Factory Mode > Control
5) SLED 4th Oclet
2) The Wall Option
6) Setting IP
※ Set different IPs between SETs
※ Refer to Installation manual '7. IP Manual Installation Guide.
122
If there is a SET setting with the same IP
in the network, IP conflict may occur
3) MANAGER/NETWORK 4) SLED IP SETTING
7) Write SLED IP, Write Cabinet IP
> Setting Success
LED R&D Lab(VD)