Advertisement
service, bring the product to an authorised service centre. When
servicing, use only identical replacement parts.
■
Do not make adjustments and repairs not described in this
manual. For other repairs, contact an authorised service agent.
■
After each use, clean the product with a soft, dry cloth.
■
Check all nuts, bolts and screws at frequent intervals for
proper tightness to ensure that the product is in safe working
condition. Any part that is damaged should be properly repaired
or replaced by an authorised service centre.
■
Bring the product to an authorised service centre to replace
damaged or unreadable labels.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
attention to avoid the following:
■
Injury caused by vibration.
–
Always use the right tool for the job, use designated handles
and use the lowest speed necessary to achieve the task.
■
Hearing injury caused by exposure to noise.
–
Wear ear protection and limit exposure.
■
Injury from flying objects from the blow tube airflow.
–
Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from handheld tools may
contribute to a condition called Raynaud's Syndrome. Symptoms
may include tingling, numbness, and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these symptoms.
There are measures that can be taken by the operator to possibly
reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating the
product, wear gloves to keep the hands and wrists warm.
■
After each period of operation, exercise to increase blood
circulation.
■
Take frequent work breaks. Limit the amount of exposure per
day.
If you experience any of the symptoms of this condition, immediately
discontinue use and see your doctor.
WARNING! Injuries may be caused, or aggravated, by
prolonged use of the product. When using any tool for prolonged
periods, ensure you take regular breaks
SYMBOLS
Please read the instructions carefully before
starting the product.
Wear ear protection.
Wear eye protection.
Do not expose to rain or damp condition.
16
Beware of thrown or flying objects. Keep all
bystanders, especially children and pets, at least
15m away from the operating area.
Rotating fans. Keep hands and feet out of
openings while the product is running.
Remove the battery pack before starting any work
18V
on the product.
Regulatory Compliance Mark (RCM). The product
meets applicable regulatory requirements.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
The following signal words and meanings are intended to explain
the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
16
Advertisement
