Table of Contents
Advertisement
General Precautions
Use this appliance for its intended purpose only and
follow these general precautions along with those listed
throughout this guide:
WARNING
SHOCK HAZARD — Electrical Grounding Required.
• Keep the unit unplugged throughout installation
except during testing.
• Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
• Never use an extension cord to connect power to
the unit.
• Always keep your working area dry.
CAUTION
• Use care when moving and handling the unit. Use
gloves to prevent personal injury from sharp edges.
• Do not lift the unit by the door or door handle.
• Do not install the unit behind closed doors or in any
way that would obstruct airflow to the front grille,
which may cause the unit to malfunction.
11/2006
CO1175 — Ice Maker/Refrigerator
2 Inspect and Plan
You have received a carton containing your CO1175 Ice
Maker/Refrigerator with a package inside containing a
User Manual, a Product Registration Card and water
connection parts. Complete and mail the Product
Registration Card or register online at
www.U-LineService.com. Once your unit is installed, keep
the User Manual and this Installation Guide in a safe place
for future reference.
CO1175 units are available in Black or Stainless. Black
units have a vinyl-clad cabinet with matching door.
Stainless models have a stainless steel door, and a black
cabinet. All Black CO1175 unit doors have a slightly
contoured handle across the top and are reversible. These
doors have recessed front panels that will accept a custom
1/4 inch thick door panel. Stainless unit doors are covered
with a protective coating and have beed ordered left-or
right-hand hinged. The Stainless doors are not reversable
and do not accept custom panels. All CO1175 units have
tempered glass shelves.
Please carefully follow the directions that apply to your
unit and your intended design.
Tools/Materials Required
• Screwdrivers — slotted and Phillips head
• 1/4-inch OD copper tubing and shutoff valve for water
supply line
• 1/4-inch thick door panel material and cutting tools
Inspection
Unwrap and inspect the unit on a flat, level surface
capable of supporting its entire weight.
3
www.U-LineService.com
Advertisement
Table of Contents
