Table of Contents
Advertisement
Setting
Top Margin
Bottom Margin
Paper Suction
Back Tension
Drying Time
Paper Size Check
Auto Cut
Skew Reduction
Roll Core Diameter
Options
Description
3 mm
Select the margin for the leading edge of the
printed image.
15 mm
Depending on the paper type and printing
20 mm
environment, colors may be uneven near the
35 mm
leading edge if the margin is small.
3 mm
Select the margin for the trailing edge of the
printed image.
15 mm
–4 to +4
Select to adjust the printer's suction setting;
choose lower values for thinner papers.
Standard
Select to adjust the paper feeding tension;
choose High or Extra High if paper wrinkles
High
during printing.
Extra High
Drying Time per Pass
Set the amount of time the printer pauses to
allow drying after each pass or each printed
Drying Time per Page
page.
On
Select On to detect the paper width when
paper is loaded.
Off
Select Off when the paper roll is empty. This
allows you to set the paper width before
feeding the paper.
Follow Paper Source
Select Follow Paper Source Settings to
Settings
follow the cut settings in Printer Settings >
Paper Source Settings > Roll Paper Setup
Never Cut
> Cut Settings.
Select Never Cut to cut paper manually.
On
Select Off if the front edge of thin or softer
paper folds.
Off
2inch
Select the paper core size for the loaded roll
paper.
3inch
139
Advertisement
Table of Contents
