Epson
SureColor
®
Start Here
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface capable of supporting the
weight of the printer (including ink and paper) and with enough space on all
sides (see illustration and table below).
Note:
See the online User's Guide for your printer's weight specifications.
W
D
45.79 in. (1,163 mm)
53.11 in. (1,349 mm)
Note:
If you are loading rigid poster board, the back of the printer must be at least
15.6 in. (396 mm) away from the wall.
Unpack and Place Printer
1
Make sure you have these items:
Printer
Paper cassette
Power cord
cover
P5370
®
7.17 in.
(182 mm)
21 in.
(533 mm)
D1
H
5.91 in. (150 mm)
23.07 in. (586 mm)
Cleaning sheets
Initial ink cartridges (10)
Spindle
Borderless printing
Limited warranty
spacer
2
Remove the outer carton from the pallet and printer and carefully lift
the printer off of the pallet.
WARNING:
The printer requires two people to lift and move it. Make sure to
grip the printer as shown in the illustration.
3
Remove all tape from the outside of the printer.
Note:
The shape, number, and position of the protective materials are subject
to change without notice.
4
Open the top cover and remove the tape and protective piece as shown.
WARNING:
The printer may malfunction if you do not remove the protective
piece.
Note:
Do not throw the protective piece away; you need it if you transport the
printer.
5
Close the top cover.
6
Lift the edge of the output tray and pull it out to remove it.
7
Extend the output tray and then remove all protective materials and tape
from it.
8
Pull out the paper cassette and remove all protective materials.