Advertisement
Disconnect power supply before making wiring con¬
nections to prevent electrical shock and equipment
damage. All wiring must comply with applicable electrical
codes, ordinances and regulations.
Connect W964F Aquatrol Panel, sensors and acces¬
sories as shown in typical system diagrams. For on-off
control applications, refer to Figs. 6-8. For 3-way mixing
valve (P+l) applications, refer to Figs. 9-16. For hookup of
optional W9260A Remote Control Panel and T7160A
Space Temperature Compensating Unit, refer to Fig. 16.
When replacing a Honeywell W902 Panel with a W964F
Panel, refer to Fig. 17. In systems with valve ports A and B
reversed, refer to Fig. 18.
W9260A
(OPTION)
SYSTEM.
FIG. 8—HOOKUP OF W964F TO TYPICAL FLAME
SAFEGUARD DEVICE ON-OFF SYSTEM.
A
A\
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD
— PROTECTION AS REQUIRED.
/2\ ADD LINK FOR ON/OFF MODE.
/3\ THERMOSTAT TERMINALS ON BOILER CONNECTION PANEL.
/4\
TERMINALS B TO A MAKE ON TEMPERATURE FALL.
E1040B
r=-1 W9260A
I'-1
»—I (OPTION)
AQUATROL I
l/vj T7160A
OUTDOOR
RESET]
|-^(OPTION)
SENSOR
CONTROLLER I
j
T7043B
W964F I
|
FIG. 7—HOOKUP OF W964F TO TYPICAL BOILER
1-1
WITH LOW VOLTAGE THERMOSTAT TERM-
FIG. 9—HOOKUP FOR W964F IN TYPICAL 3-WAY
INALS—ON-OFF SYSTEM.
MIXING VALVE SYSTEM.
5
63
-
2036—4
Advertisement
