Table of Contents
Advertisement
> continued
4 Press & EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
5 select dual or single sided recording.
To record
select
One side
—
Both sides*
C=) or RELAY
++ Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
6 When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that "DOLBY NR
B" appears in the display.
7 Press CD SYNCHRO.
The REC and 08 (pause) lamps light up
and deck B stands by for recording.
The [> jamp lights up and the <I lamp
flashes for a few seconds, then goes off.
Side in recording
pause mode
If you want to start recording from the
reverse side, press <J sd that the <1
lamp lights steadily.
8 Press 00 on the tape player to release
recording pause.
Recording starts.
After about 10 seconds, the CD player
starts playing.
To stop recording
Press O on the tape player.
To check the order
Press CHECK on the remote repeatedly.
Each time you press CHECK, the number of
the programmed tracks appear in the
display.
To cancel program edit
Press CONTINUE on the CD player.
1 8
Chapter 4: the Tape Player
Press DIRECTION to
SS
SSS
a
ees
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE II (CrO2)
tapes.
SYSTEM
POWER->ON
VIAO~I
1 Press & EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side of
the tape, unless you change the playing
direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Press TUNER/BAND several times
until the desired radio band appears.
3 Tune in the radio station you want to
record. (See "Listening to the Radio" or
"Playing Preset Radio Stations" for
details.)
4 Select dual or single sided recording.
To record
Press DIRECTION to
select
One side
=
C=) or RELAY
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5 When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that "DOLBY NR
B" appears in the display.
6 Press REC.
The REC and 0 (pause) lamps light up
and deck B stands by for recording.
The &> lamp lights up and the <J lamp
flashes for a few seconds, then goes off.
a
| ox
Side in recording
pause mode
If you want to start recording from the
reverse side, press <J so that the <I
lamp lights steadily.
7 Press (1 on the tape player to release
recording pause.
Recording starts.
To stop recording
Press U1 on the tape player.
To reduce noise during AM recording
If a whistling noise is heard while
recording, reorient the AM loop antenna for
optimum reception.
i
Recording From
Another Tape
(dubbing)
Dubbing Another Tape
Automatically
You can record an entire tape onto another
automatically by using high speed dubbing.
Use the buttons on the unit and TYPE |
(normal) or TYPE IJ (CrOz) tapes for
dubbing.
SYSTEM
POWER > ON
1 Press FUNCTION repeatedly until
"TAPE" appears in the display.
2 Press & EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback will start from
the front side of the tape, unless you
change the playing direction before
recording.
Make sure the tabs on the cassette in
deck B have not been removed.
Advertisement
Table of Contents
