Functions - Breville the Bambino Instruction Book

Functions

FIRST USE
1. Remove the water tank and fill it with
potable water to the indicated MAX line.
Place the water tank back firmly onto the
machine.
2. Ensure that the drip tray is firmly placed on
the machine.
3. Place a 500ml container under the
portafilter and steam wand for the water
drips for this first cycle.
4. Plug the power cord into the power outlet.
5. Press the 1 Cup or 2 Cup or Steam or Hot
water buttons to turn the machine on.
NOTE
The first use cycle is to rinse the machine and
prime the heating system.
STANDBY MODE
To turn off the operation and enter standby
mode, press the 1 Cup and Hot Water buttons
for 0.5 second simultaneously.
+
NOTE
Unit will enter 'standby mode' when idle or no
interaction from user after 10 minutes.
FILLLING THE WATER TANK
Lift the water tank from the machine. Remove
the water tank lid and add potable water to
the water tank, filling to the MAX marking
indicated.
Replace the water tank onto the machine, press
down ensuring it is properly attached and
sitting flush against the back of the machine.
NOTE
Machine LED lights will flash 6 times for
3 seconds when no water is detected in the
water tank.
FILTER BASKETS
This machine includes dual wall 1 Cup
and 2 Cup filter baskets.
1 CUP
1 CUP
Use the 1 cup filter basket when brewing a
single cup and the 2 cup filter baskets when
brewing 2 cups or a stronger single cup or
mug.
0.5s
You will need to adjust the grind amount and
size if switching from a single basket to a
double basket, or vice versa.
The provided filter baskets are designed for:
1 Cup filter basket = 8-11g
2 Cup filter basket = 16-19g
2 CUP
2 CUP
11