Polaris RANGER 150 EFI 2020 Owner's Manual page 91

SHOCK SPRING ADJUSTMENT
Uneven adjustment may cause poor handling of the vehicle, which could result
in an accident. Always adjust both the left and right spring preloads equally or
have your POLARIS dealer perform the adjustments.
WHEEL TOE ALIGNMENT
1. Place machine on a smooth level surface and set steering wheel in a straight
ahead position. Secure the steering wheel in this position.
2. Place a chalk mark on the center line of the front tires approximately 10"
(25.4 cm) from the floor or as close to the hub/axle center line as possible
It is important the height of both marks be equally positioned to get an accurate
3. Measure the distance between the marks and record the measurement. Call
this measurement "2".
WARNING
The front and rear shock absorber
springs are adjustable to increase or
decrease spring tension. Rotate the
adjuster
counter-clockwise to make
adjustments.
Always apply the same adjustment
setting to all four wheels.
NOTE
measurement.
MAINTENANCE
q
either clockwise or
q
.
89