Polaris RANGER 150 EFI 2020 Owner's Manual page 83

MAINTENANCE
SPARK PLUG
SPARK PLUG GAP/TORQUE
Electrode Gap New Plug Torque Used Plug Torque
9-11 ft. lbs. 17-20 ft. lbs.
0.6-0.7 mm
(12-15 Nm) (23-27 Nm)
NOTICE
Spark plug condition is indicative of engine operation. The spark plug firing end
condition should be read after the engine is warmed up and the vehicle is
driven at higher speeds. Immediately check the spark plug for correct color.
WARNING
A hot exhaust system and engine can cause burns. Wear protective gloves
when removing a spark plug for inspection.
SPARK PLUG CONDITION
Normal Plug
The normal insulator tip is gray, tan or light brown. There will be few combustion
deposits. The electrodes are not burned or eroded. This indicates the proper
type and heat range for the engine and the service.
TIP
The tip should not be white. A white insulator tip indicates overheating, caused
by use of an improper spark plug or incorrect throttle body adjustments.
Wet Fouled Plug
The wet fouled insulator tip is black. A damp oil film covers the firing end. There
may be a carbon layer over the entire nose. Generally, the electrodes are not
worn. General causes of fouling are excessive oil, use of non-recommended
injection oil or incorrect throttle body adjustments.
81