Safety Instructions • Position on a flat, stable surface. • A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product. • Consult Local and National Standards to comply with the following: - Health and Safety at Work Legislation - BS EN Codes of Practice...
• Instruction manual BUFFALO prides itself on quality and service, ensuring that at the time of unpacking the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Installation The “bain marie” should be placed on a solid level surface. The on/off switch and thermostat should be set to the off position. Note: Before using for the first time, clean all parts well. Let dry completely. Operation GN pan for food Water tank Heating indicator On/off switch indicator...
Wipe dry the appliance, especially the bottom part of the water tank. Note: Use a suitable cleaner and always follow the instructions on the cleaner container. BUFFALO recommend that this appliance is de-scaled every 3 months or more often in hard water areas.
Troubleshooting A qualified technician should carry out repairs if required. Fault Probable Cause Solution The unit is not The unit is not switched on Check the unit is plugged in correctly and working switched on Plug or lead is damaged Replace plug or lead Fuse in the plug has blown Replace the fuse...
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserves the right to change specifications without notice.